Deposition of Diamond-Like Carbon Films on 15-5PH Stainless Steel Aerospace Alloy Aiming at Enhanced Mechanical Properties
DOI:
https://doi.org/10.19142/rpq.v21i38.808Keywords:
diamond-like carbon (DLC), stainless steel 15-5 PH, surface treatmentsAbstract
The main purpose of this study was to coat the surface of the 15-5 PH steel alloy with diamond-like carbon films. The depositions were carried out using the PECVD technique. Diamond-Like Carbon (DLC) is a material widely used for surface coatings, representing a metastable form of amorphous carbon that contains sp3 and sp2 bonds, characteristic of diamond and graphite. This composition allows the properties of both materials to be combined, such as excellent wear resistance and a low coefficient of friction. Detailed analyzes were carried out to evaluate the structural and mechanical properties, including Raman spectroscopy, profilometry, SEM and tribometry. This research seeks to delve deeper into surface treatment processes, with the aim of increasing the durability of parts and components.
References
ROBERTSON, J. (2002). Diamond-like amorphous carbon. Materials Science and Engineering: R: Reports, 37(4-6), 129-281.
GRELHA, A. (1999). Diamond-like carbon coatings as biocompatible materials – an overview. Diamond and Related Materials, 8(2-5), 428-434.
LIFSHITZ, Y. (1999). Hydrogen-free amorphous carbon films: correlation between growth conditions and properties. Diamond and Related Materials, 8(8-9), 1659-1676.
ERDEMIR, A., DONNET, C. (2006). Tribology of diamond-like carbon films: recent progress and future perspectives. Journal of Physics D: Applied Physics, 39(18), R311-R327.
TAMOR, M.A., VASELL, D. (1994). Ion energies and properties of DLC films. Journal of Applied Physics, 76(6), 3823-3830.
SILVA, S., GASKELL, K., MCKENZIE, DR, BILEK, MMM (2000). Ionic flux and structure of DLC films. Surface and Coatings Technology, 133-134, 419-424.
SCHWAN, J., ULRICH, S., BATORI, V., EHRHARDT, H., SILVA, S.R.P. (1996). Raman spectroscopy on amorphous carbon films. Journal of Applied Physics, 79(3), 1416-1422.
MARIANO, SFM, PILLACA, EJDM, UEDA, M., DE MORAES, RO (2014). Influence of magnetic field on DLC coatings grown by plasma immersion ion implantation and crossed field deposition. Surface and Coatings Technology, 260, 171-177.
WEI, Q., LI, L., WEI, S. ZHANG, Z. (1999). Residual stress in diamond-like carbon films. Surface and Coating Technology, 123(2-3), 292-296.
SCHMID, P. E., STEINER, P., WEHRLI, B., SCHLAPBACH, L. (1994). Optical properties and interference in DLC thin films. Applied Physics Letters, 65(6), 631-633.
FERRARI, AC, ROBERTSON, J. (2000). Interpretation of Raman spectra of disordered and amorphous carbon. Physical Review B, 61(20), 14095-14107.
ERDEMIR, A., ERYILMAZ, OL, NILUFER, IB (2000). The role of hydrogen in the tribological properties of diamond-like carbon films. International Tribology, 33(7), 523-530.
OGWU, AA, LAMBERTON, RW, MAGUIRE, PD, MCLAUGHLIN, JA (1999). Deposition of amorphous carbon films in a RF PECVD system. Journal of Physics D: Applied Physics, 32(9), 981-986.
TEER, DG, OGLE, JC (2004). Investigations on ultra-high-speed laser material deposition as an alternative to hard chrome plating. Journal of Laser Applications, 16(1), 10-15.
PERSSON, M., KARLSSON, S. (2003). Simulation-assisted design and manufacturing of anodes for the hard chrome plating process. Surface and Coating Technology, 167(1), 23-29.
NELSON, N., RAKOWSKI, R.T., FRANKS, J., WOOLLIAMS, P., WEAVER, P., JONES, B.J. (2014). The effect of substrate geometry and surface orientations on the structure of DLC film deposited using PECVD. Surface and Coatings Technology, 254, 73–78.
A GHAIE-KHAFRI, M., ADHAMI, F. (2010). The effect of aging on microstructure and hardness of 15-5 PH stainless steel. Materials Science and Engineering: A, 527, pp. 199-200.
HERNY, E. (2009). Precipitation behavior in stainless steels. International Heat Treatment and Surface Engineering, 3, pp.
FLUGGE, W. (1952). Landing gear impact. National Advisory Committee for Aeronautics – Technical Note 2743, Washington, pp 1-91.
ZHOU, T., PRASATH BABU, R., ODQVIST, J., YU, H., HEDSTRÖM, P. (2018). Quantitative electron microscopy and physically based modeling of Cu precipitation in 15-5PH precipitation hardening martensitic stainless steel. Materials and Design, 143, pp. 149–150.
ASTM- AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM B912-02. Standard Specification for Passivation of Stainless Steels Using Electropolishing, 2018. 4p.
OGURI, K.; ARAI, T. Two different low friction mechanisms of diamond-like carbon with silicone coatings formed by plasma-assisted chemical vapor deposition. Journal of Materials Research, vol. 7, no. 6, p. 1313–1316, 1992.
MACÁRIO, PF, VIEIRA, A., MANFROI, L., DA SILVA, MGP, LEITE, P., AND VIEIRA, L. (2019) Corrosion behavior of aluminum Al2024-T3, Al5052-H32 and Al6061-T6 alloys coated with DLC films in aviation fuel, Jet A-1 and AVGAS 100LL media. Matter. Corrosion, 70 (12), 2278–2291.
KASIOROWSKI, T. et al. Microstructural and tribological characterization of DLC coatings deposited by plasma enhanced techniques on steel substrates. Surface and Coatings Technology, vol. 389, p.1-10: 125615, 2020.
FERRARI, AC; ROBERTSON, J. Interpretation of Raman spectra of disordered and amorphous carbon. Surface and Coatings Technology, vol. 61, no. 4, p. 1–13, 2000.
DE OLIVEIRA, SMM et al. Comparative Study of Candida albicans Inactivation by Nonthermal Plasma on Stainless Steel with and without Diamond-like Carbon Film. ACS Omega, vol. 4, no. 4, p. 6891–6902, 2019.
SCHWAN, J. et al. Raman spectroscopy on amorphous carbon films. Journal of Applied Physics Letters, vol. 80, p. 440-447, 1996.
BULL, SJ Failure mode maps in the thin film scratch adhesion test. Tribology International, vol. 30, no. 7, p. 491-498, 1997.
BURNETT, PJ; RICKERBY, DS The relationship between hardness and scratch adhesion. Thin Solid Films, vol. 154, no. 1–2, p. 403–416, Nov. 1987.
SVEEN, S. et al. Scratch adhesion characteristics of PVD TiAlN deposited on high-speed steel, cemented carbide and PCBN substrates. Wear, vol. 308, no. 1–2, p. 133–141, 2013.
VIEIRA, L. et al. Scratch testing for micro- and nanoscale evaluation of tribocharging in DLC films containing silver nanoparticles using AFM and KPFM techniques. Surface and Coatings Technology, vol. 260, p. 205–213, Dec. 2014.





